The HydraWash™ system was developed to enable plugging a well without performing any milling operation.
The HydraWash™ System:
HydraWash is being superseded
Hydrawash was our initial Perf, Wash and Cement (PWC) system developed to enable well abandonment without section milling. Due to the inherent limitations of cup based systems, Hydrawash is superseded in our equipment catalogue by HydraHemera and HemeraPoseidon.
Cup based PWC systems (such as HydraWash™) can be adequate for relatively straightforward annular remediation applications, but the reliance entirely on volumetric flow, limits the ability to thoroughly wash and cement the annuli under challenging conditions such as high mudweights, or tight tolerances on maximum ECD to avoid losses to exposed permeable formations.
Furthermore, potential for existing cement in the annulus will slowdown or prevent cup based PWC operations due to the possible loss of circulation route and subsequent damage to tooling components.
We have therefore replaced HydraWash™ in our inventory with HydraHemera™ and HemeraPoseidon™
